[LARTC] 2 gateways - routing based in source address

[Jorge Evangelista]

Hi,

I have not tried it yet. I think that you have to make a rule similiar as

ip rule  add   from 0.0.0.0/0  table 100
ip route add  default via  192.168.1.254  table 100 proto static

ip rule  add   from 0.0.0.0/0  table 200
ip route add  default via  192.168.0.254  table 200 proto static



#Mark incoming packets for later routing
iptables -t mangle -A PREROUTING -j CONNMARK --restore-mark

iptables -A PREROUTING -t mangle -i eth2 -s 0.0.0.0/0  -p tcp --dport
80 -j MARK --set-mark 1
iptables -A PREROUTING -t mangle -i eth2 -s 0.0.0.0/0  -p tcp --dport
443 -j MARK --set-mark 1
iptables -A PREROUTING -t mangle -i eth2 -s 0.0.0.0/0  -j MARK --set-mark 2

ip rule add from all fwmark 1 table 100
ip rule add from all fwmark 2 table 200



For NAT
iptables -t nat -A POSTROUTING -o eth0 -j SNAT --to $IP_ETH0
iptables -t nat -A POSTROUTING -o eth1 -j SNAT --to $IP_ETH1




On 5/29/07, Pablo Fernandes Yahoo <fernandes_pablo at yahoo.com.br> wrote:
>
>
>
> Hi,
>
>
>
> First of all, thank you for your help.
>
>
>
> And how can i put all the traffic comming from anywhere with destination
> port 80 or 443 to go out by the gateway 192.168.1.254, while all the rest
> going out by 192.168.0.254 ?
>
>
>
> Im trying here different ways with ToS but it isn't working. Thank you for
> any Tip.
>
>
>
> Regards
>
>
>
> >Hi Pablo,
>
> >
>
> >You have to configure your box linux similar to:
>
> >
>
> >ip rule add from 10.20.0.0/24   to 0.0.0.0/0  table 100
>
> >ip route add default via 192.168.0.254  table 100
>
> >
>
> >ip rule add from 10.30.0.0/24  to 0.0.0.0/0  table 200
>
> >ip route add default via 192.168.1.254 table 200
>
> >
>
> >
> _______________________________________________
> LARTC mailing list
> LARTC at mailman.ds9a.nl
> http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
>
>


-- 
"The network is the computer"