[LARTC] 2 WAN - 1 LAN - ping and route problem

[Don Gould]

ClarkConnect Home 3.2

eth0 - WAN - inet - ip:192.168.1.2 gw:192.168.1.1 (connected to my
www.woosh.co.nz gatway)
wlan - WAN - private community wireless networt - ip:10.252.16.16
gw:10.252.16.1

eth1 - LAN - ip:192.168.2.1 

# route add -net 10.0.0.0 netmask 255.0.0.0 gw 10.252.16.1


[root at bowenvale etc]# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.252.16.0 * 255.255.255.224 U 0 0 0 wlan0
192.168.2.0 * 255.255.255.0 U 0 0 0 eth1
192.168.1.0 * 255.255.255.0 U 0 0 0 eth0
10.0.0.0 10.252.16.1 255.0.0.0 UG 0 0 0 wlan0
default 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
[root at bowenvale etc]#

I can ping 10.252.1.7 from the cc box (which is called 'bowenvale').

I can't get a ping result from any of the machines connected to the
LAN(192.168.2.0/24)

I can ping anything on the internet ok (ie where the ip being pinged is
located on the default route).

I've had it suggested to me that my problem is that I don't have the NAT
set up correctly to nat WAN-wlan0 --> LAN-eth1

I've had a look at the multi-WAN module but that seems to be more for
dealing with two or more wan links where they're both inet.

I want the 10.0.0.0 network on the WAN side of the network because it's
a public access network, hence needs to be on the other side of my
firewall.

What am I doing wrong and what should I be doing?

Cheers Don
-- 
Don Gould