[LARTC] Simple shaping question

[Diego Cabrero]

Try chosing a lower limit for the 80th port at least 900-10, then add a 
sfq qdisc down the 1:10, 1:20 and 1:30 classes like this:

tc qdisc add dev eth0 parent 1:x0 handle 1: sfq perturb 10

It will work, i had that kind of problem before.

Regards.

-Diego




Jonas Jasas escribió:

>I have linux box (does nat and firewall for small network) connected
>to dsl. I want to set priorities for protocols (that nothing could
>disturb web browsing). This is my rules (eth0 connected to internet):
>
>/sbin/tc qdisc del dev eth0 root
>/sbin/tc qdisc add dev eth0 root handle 1 htb default 30 r2q 100
>
>/sbin/tc class add dev eth0 parent 1: classid 1:2 htb rate 900Kbit burst 15k
>
>/sbin/tc class add dev eth0 parent 1:2 classid 1:10 htb rate 900Kbit
>ceil 900Kbit
>/sbin/tc filter add dev eth0 parent 1:0 protocol ip prio 100 u32 match
>ip sport 80 0xffff classid 1:10
>/sbin/tc filter add dev eth0 parent 1:0 protocol ip prio 100 u32 match
>ip dport 80 0xffff classid 1:10
>
>/sbin/tc class add dev eth0 parent 1:2 classid 1:20 htb rate 10Kbit ceil 900Kbit
>
>I start to download from ftp it uses all bandwidth (as it should be),
>when I start to download on web, web and ftp rated become more or less
>equal :/ . I want that ftp traffic would be limited to 10kbit and all
>other bandwidth would be left for web trafic.
>
>What is wrong with my rules?
>Thank you for advice!
>_______________________________________________
>LARTC mailing list
>LARTC at mailman.ds9a.nl
>http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
>  
>