[LARTC] Bridging lan over wireless link

[Joost Kraaijeveld]

Hi all,

I want to create a bridge (see picture below) between 2 LANs with the =
same IP range (192.168.0.0/24) using 2 wireless links that use load =
sharing over multiple interfaces (as descibed here: =
http://lartc.org/howto/lartc.loadshare.html) for load balancing and =
fault tolerance. Both links should use IPsec for encryption.

I have googled for an example that does this but I could not find it.

Is this possible? Not in threory but in practise: has anyone done this? =
If so, can anyone give me an example/pointer to an example of how to do =
this?


                         ________     ________
                        |        |   |        |
                        | ant1.1 |---| ant2.1 |
                        |________|   |________|
             _________       |            |        _________
            |         |-eth1-+            +--eth1-|         |
lan1 --eth0-| bridge1 |                           | bridge2 |-eth0--lan2
            |_________|-eth2-+            +--eth2-|_________|
                         ____|___     ____|___
                        |        |   |        |
                        | ant1.2 |---| ant2.2 |
                        |________|   |________|




Groeten,

Joost Kraaijeveld
Askesis B.V.
Molukkenstraat 14
6524NB Nijmegen
tel: 024-3888063 / 06-51855277
fax: 024-3608416
e-mail: J.Kraaijeveld@Askesis.nl
web: www.askesis.nl=20