[LARTC] Filter question

[Andy Furniss]

Andre Correa wrote:
> 
> Hi guys, I may not have made myself clear in my last message so I'll try 
>   it easy this time. Maybe someone can send me some help.
> 
> I'm trying something like this:
> 
> 
> # root stuff
> tc qdisc add dev eth0 root handle 1: htb default 2
> tc class add dev eth0 parent 1: classid 1:1 htb rate 50000kbit
> # default class
> tc class add dev eth0 parent 1: classid 1:2 htb rate 2000kbit
> 
> # root class for my "garanteed bandwidth" service
> tc class add dev eth0 parent 1: classid 1:3 htb rate 10Mbit
> 
> # class for a 1Mbit shared bandwidth
> tc class add dev eth0 parent 1:3 classid 1:1024 htb rate 1Mbit
> # qdisc used to _make my life easier scripting classes numbers_
> tc qdisc add dev eth0 parent 1:1024 handle 1024: htb default 250
> # default class for this second qdisc
> tc class add dev eth0 parent 1024: classid 1024:250 htb rate 32kbit
> 
> # each customer gets the following class and filter
> tc class add dev eth0 parent 1024: classid 1024:1 htb rate 256kbit
> tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip dst
> xxx.xxx.xxx.xxx/yy flowid 1024:1
> 
> # another customer...
> tc class add dev eth0 parent 1024: classid 1024:2 htb rate 256kbit
> tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip dst
> www.www.www.www/zzz flowid 1024:2
> 
> 
> My problem is that this filters are created but they don't send traffic 
> to the expected class. All traffic is going to 1:2 (default class). Can 
> somebody tell me why?
> 
> I apreciate any help, I'm in trouble with this...
> 
> tks in advance.
> 
> Andre
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>