[LARTC] Doesn´t work

[Brent Clark]

XMundo - Soporte Tecnico wrote:

>I have the next script written by me but it doen´t work correctly. The
>modem2 (eth2) send the
>packets with the source IP of the modem1 (eth0).
>
>I´m view it with the snort (snort -i eth2 -Nv port 80).....
>
>Any idea?
>
>It is my script::
>##################################
>
>IP=/sbin/ip
>IPTABLES=/sbin/iptables
>MODEM1="eth0"
>MODEM2="eth2"
>LAN="eth1"
>
>$IPTABLES -A FORWARD -i $LAN -o $MODEM1 -j ACCEPT
>$IPTABLES -t nat -A POSTROUTING -o $MODEM1 -j MASQUERADE
>$IPTABLES -A FORWARD -i $LAN -o $MODEM2 -j ACCEPT
>$IPTABLES -t nat -A POSTROUTING -o $MODEM2 -j MASQUERADE
>
>$IP rule add fwmark 1 table modem1
>$IP rule add fwmark 2 table modem2
>$IP rule add fwmark 3 table web
>
>$IP route add table web eql nexthop via 24.xxx.xxx.1 dev $MODEM1 nexthop via
>200.xxx.xxx.1 dev $MODEM2
>
>$IP route add default via 24.xxx.xxx.1 dev $MODEM1 table modem1
>$IP route add default via 200.xxx.xxx.1 dev $MODEM2 table modem2
>
>$IPTABLES -A PREROUTING -t mangle -i $LAN -p tcp --dport 80 -j
>MARK --set-mark 3
>
>echo "0" > /proc/sys/net/ipv4/conf/eth0/rp_filter
>echo "0" > /proc/sys/net/ipv4/conf/eth2/rp_filter
>
>_______________________________________________
>LARTC mailing list / LARTC@mailman.ds9a.nl
>http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>
>
>  
>
Hi

Arnt you supposed to use PREROUTING.

Kind Regards
Brent Clark