[LARTC] $100 USD to the first person that can provide the rules/scripts that will solve the QOS latency & bandwidth allocation issue !!!!

[Stef Coene]

On Thursday 04 December 2003 03:33, Greg Freeman wrote:
> I tried the following rules and had the same bad latency results for the
> corp site to remote site. Below are the rules I tried which gave the bad
> (avg. 350ms) latency:
>
> ----corp rules----
>
> tc qdisc add dev ipsec0 handle 1: root cbq bandwidth 600kbit avpkt 1000
> tc class add dev ipsec0 parent 1: classid 1:1 cbq bandwidth 240kbit
> avpkt 500 prio 1 rate 240kbit bounded isolated
> tc filter add dev ipsec0 parent 1:0 protocol ip prio 100 route
> tc filter add dev ipsec0 parent 1:0 protocol ip prio 1 u32 match ip dst
> 10.0.1.20 flowid 1:1
> tc filter add dev ipsec0 parent 1:0 protocol ip prio 1 u32 match ip dst
> 10.0.1.21 flowid 1:1
> tc filter add dev ipsec0 parent 1:0 protocol ip prio 1 u32 match ip dst
> 10.0.1.22 flowid 1:1
>
>
>
> ----remote rules------
>
> tc qdisc add dev ipsec0 handle 1: root cbq bandwidth 580kbit avpkt 1000
> tc class add dev ipsec0 parent 1: classid 1:1 cbq bandwidth 240kbit
> avpkt 500 prio 1 rate 240kbit bounded isolated
> tc filter add dev ipsec0 parent 1:0 protocol ip prio 100 route
> tc filter add dev ipsec0 parent 1:0 protocol ip prio 1 u32 match ip dst
> 10.0.0.7 flowid 1:1
>
>
>
>
>
> Any help would be greatly appreciated.
The bandwidth must be your NIC bandwidth.  So 10mbit or 100mbit.  And remove 
the isolated parameter.

Stef

-- 
stef.coene@docum.org
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net