[LARTC] "Help with routing"

[Robert Kurjata]

Hi nixo,

I suppose you don't preserve properly output address see my postting
with script from 15th October this year :)
(append prohibit default:)


nnca> the scheme of my LAN is the next:

nnca> eth0 isp1 /32
nnca> eth1 lan de isp1 (LAN With public IP /24)
nnca> eth2 isp2 /32
nnca> eth3 lan de isp2 (LAN With public IP /26)

nnca> ip route add 200.47.x.x/24 dev eth0 src 200.47.4.x table 1
nnca> ip route add default via 200.47.4.x table 1


nnca> ip route add  200.80.32.x/26 dev eth2 src 200.80.32.x table 2
nnca> ip route add default via 200.80.32.x table 2



nnca> ip rule add from 200.47.4.x  table 1
nnca> ip rule add from  200.80.32.x  table 2

nnca> ip route add default scope global nexthop via 200.47.4.x dev eth0  nexthop
nnca> via
nnca> 200.80.32.x dev eth2

nnca> ******

nnca> My  problem is this: when I trace from the NETWORK of ISP1, sometimes the
nnca> tracer go out from the gateway of ISP2 and vice versa

nnca> And when someone trace an IP from my LAN of ISP1, it`s showme as before
nnca> complete the gateway from ISP2 y vice versa.


nnca> Mi question is: what is wrong in my config...??? What I need to put or is
nnca> anything wrong with this config???.
nnca> THANKS VERY MUCH AND SORRY FOR MI HIGHSCHOOL ENGLISH.


nnca> _______________________________________________
nnca> LARTC mailing list / LARTC@mailman.ds9a.nl
nnca> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/



-- 
Greetings,
 Robert                            mailto:rkurjata@ire.pw.edu.pl